----------------------------------------------------------------------------- Mauna Loa Solar Observatory Observer's Log ----------------------------------------------------------------------------- Thu Apr 1 16:14:14 GMT 2021 Year: 21 Doy: 091 Observer: lisapg WEATHER COMMENT: lisapg: Thu Apr 01 16:48:01 GMT 2021 Temp: 34F with windspeed at about 3-9mph from the Southwest. Sky looks clear. ___end___ UCoMP COMMENT BY lisapg: Thu Apr 01 16:50:35 GMT 2021 Back cover screw of the UComp housing popped off when I moved the spar. Tried to put it back in and it is just spinning in the hole that it screws into. Will try to find a replacement to screw the back cover as it currently is slightly open towards the back end. ___end___ GENERAL COMMENT BY lisapg: Thu Apr 01 16:50:38 GMT 2021 Opened windows upstairs ___end___ GENERAL COMMENT BY lisapg: Thu Apr 01 16:50:41 GMT 2021 PM Blew off Kcor O1 ___end___ GENERAL COMMENT BY lisapg: Thu Apr 01 17:03:46 GMT 2021 Note that the temperature and wind reader we pull from has been frozen since the power outage. So when we use the weather drop down, the current conditions are wrong. Tried restarting it and the computer to no avail. Using NOAAs' weather conditions for our morning weather log. ___end___ GENERAL COMMENT BY lisapg: Thu Apr 01 17:15:30 GMT 2021 Kcor above dome ___end___ Thu Apr 01 17:17:13 GMT 2021 Kcor Focus/alignment program exited Thu Apr 01 17:18:35 GMT 2021 KCOR Start Synoptic Patrol Thu Apr 01 17:20:45 GMT 2021 KCOR End Patrol KCOR COMMENT BY lisapg: Thu Apr 01 17:27:02 GMT 2021 Kcor computer stopped responding; the MC4U GUI started flashing and nothing would work. Did a hard reboot and hopefully it'll come back up running fine. ___end___ Thu Apr 01 17:32:38 GMT 2021 Kcor Focus/alignment program exited GENERAL COMMENT BY lisapg: Thu Apr 01 17:35:12 GMT 2021 Moonfish isn't allowing anything to be clicked on screen, restarting the computer to hopefully fix it. ___end___ Thu Apr 01 17:35:26 GMT 2021 KCOR Start Synoptic Patrol Thu Apr 01 19:06:06 GMT 2021 KCOR End Patrol Thu Apr 01 19:06:07 GMT 2021 KCOR Start Calibration script: c:\kcor\mlso-calibration22deg-20171025.ini Thu Apr 01 19:21:18 GMT 2021 KCOR End Calibration Script Thu Apr 01 19:21:35 GMT 2021 KCOR Start Synoptic Patrol Thu Apr 01 19:21:35 GMT 2021 KCOR Start Synoptic Patrol GENERAL COMMENT BY lisapg: Thu Apr 01 19:26:13 GMT 2021 Thorlabs APT user was on Difference for the display mode and Open loop for the operating mode. Operating mode has been switched to Monitor ___end___ GENERAL COMMENT BY lisapg: Thu Apr 01 21:01:13 GMT 2021 Unplugging and re plugging in the building camera below seems to have gotten it working again. ___end___ GENERAL COMMENT BY lisapg: Thu Apr 01 21:54:55 GMT 2021 Seems like our temperature reader is back up and running again. Now currently updating properly. ___end___ GENERAL COMMENT BY lisapg: Thu Apr 01 22:15:55 GMT 2021 This morning, when I started up,on the MC4U GUI, the ePDU#2 LED is red. When Kcor computer wasn't responding, I shut the computer down, went upstairs and restarted the two pulizzis in the upper Nema box but that didn't seem to help. However, it seems to not have an impact on me starting up and taking data. ___end___ Thu Apr 01 22:35:56 GMT 2021 KCOR End Patrol GENERAL COMMENT BY lisapg: Thu Apr 01 22:36:21 GMT 2021 Clouds coming up from Saddle; closing dome as some of it looks very low. ___end___ GENERAL COMMENT BY lisapg: Thu Apr 01 23:06:51 GMT 2021 Ben was able to help with the ePDU#2 LED being lit; Channels 1, 2, 3 were lit on the pulizzi upstairs but only Channel 1, 2 were suppose to be lit. Thank you Ben ___end___ GENERAL COMMENT BY lisapg: Thu Apr 01 23:06:58 GMT 2021 In fog ___end___ GENERAL COMMENT BY lisapg: Fri Apr 02 00:57:16 GMT 2021 Sky was a little bright this morning; clouded and fogged out this afternoon. ___end___ ONSITE STAFF: lisapg