----------------------------------------------------------------------------- Mauna Loa Solar Observatory Observer's Log ----------------------------------------------------------------------------- Fri Jun 19 16:19:50 GMT 2015 Year: 15 Doy: 170 Observer: berkey WEATHER COMMENT: berkey: Fri Jun 19 16:22:46 GMT 2015 Temp: 46.4f, Humidity: 22%, Pressure: 28.621in, Wind: 10mph from the south, Skies: thin cirrus ___end___ WEATHER COMMENT: berkey: Fri Jun 19 16:22:58 GMT 2015 Temp: 46.5f, Humidity: 23%, Pressure: 28.625in, Wind: 13mph from 360degs, Skies: ___end___ WEATHER COMMENT: berkey: Fri Jun 19 16:23:01 GMT 2015 Temp: 46.4f, Humidity: 22%, Pressure: 28.621in, Wind: 10mph from the south, Skies: thin cirrus ___end___ GENERAL COMMENT BY berkey: Fri Jun 19 16:24:16 GMT 2015 Day 2 of kcor new camera plate install ___end___ KCOR COMMENT BY berkey: Fri Jun 19 20:04:36 GMT 2015 Optical alignment in tip/tilt is done. Taking some distoration masks flats. ___end___ Fri Jun 19 20:31:16 GMT 2015 COMP Start Patrol KCOR COMMENT BY berkey: Fri Jun 19 21:01:54 GMT 2015 Yesterday we reverted to the old cameralink cable on the reflected beam. Today I couldn't get socketcam running got lots got board acquisition errors on Brd1. Reverting to the old cable on this camera fixed this. Taking distortion mask data on kcor from 20:59:24 to 21:00:57 ___end___ CoMP COMMENT BY berkey: Fri Jun 19 21:17:59 GMT 2015 I didn't noticed it for a bit, but we took a bit of comp data on the inside of the dome shutter. So we should see a bit of junk over the last 15 minutes ___end___ KCOR COMMENT BY berkey: Fri Jun 19 21:55:31 GMT 2015 I tried to tidy up the cameralink cables and now I am having socketcam problems again. :( I tried rebooting and re-seating the cables a couple times no success. Giving up for the day. ___end___ Fri Jun 19 21:56:28 GMT 2015 COMP End Patrol